Creating initial configuration for Cisco IOSv
==================================================

* Answer 'no' to the 'Would you like to enter the initial configuration dialog' prompt
* Press ENTER to start a CLI session
* Go into enable mode, enter configuration mode
* Copy-paste the following configuration

=============================================
hostname iosv
no ip domain lookup
ip domain name lab.local
!
no service config
!
crypto key generate rsa modulus 2048
ip ssh version 2
!
aaa new-model
!
aaa authentication login default local
aaa authorization exec default local
!
username vagrant privilege 15 secret vagrant
!
ip ssh pubkey-chain
 username vagrant
  key-hash ssh-rsa DD3BB82E850406E9ABFFA80AC0046ED6
!
vrf definition MGMT
 description Management interface
 !
 address-family ipv4
 exit-address-family
!
interface GigabitEthernet0/0
 vrf forwarding MGMT
 description vagrant-management
 ip address dhcp
 no shutdown
!
line vty 0 4
 transport input ssh
!
event manager applet ENABLE-MGMT
 event syslog pattern "SYS-5-RESTART"
 action 0 cli command "enable"
 action 1 cli command "conf t"
 action 2 cli command "crypto key generate rsa modulus 2048"
 action 3 cli command "interface GigabitEthernet0/0"
 action 4 cli command "no shutdown"
 action 5 cli command "exit"
!
end
=============================================

* Save the configuration with 'wr mem'
* Disconnect from console (ctrl-] usually works).
